Traffic Control Technician Resume Guide

Traffic control technicians are responsible for installing, repairing and maintaining traffic signals, signs and pavement markings. They also inspect existing equipment to ensure it is working properly and meets safety standards. Additionally, they may be required to respond to emergency situations involving malfunctioning traffic signal systems or other related infrastructure issues.

You’ve got the skills and experience to be a great traffic control technician, but management won’t know about it until you write an engaging resume that captures their attention. Showcase your abilities so you can get hired for this dream job!

This guide will walk you through the entire process of creating a top-notch resume. We first show you a complete example and then break down what each resume section should look like.

The guide is divided into sections for your convenience. You can read it from beginning to end or use the table of contents below to jump to a specific part.

Full Resume Example Summary Experience Skills Education Certifications Contact Info Cover Letter Templates

Traffic Control Technician Resume Sample

Kolby Dicki
Traffic Control Technician

[email protected]
926-094-6918
linkedin.com/in/kolby-dicki

Summary

Energetic traffic control technician with 5+ years of experience in traffic engineering and project management. Skilled in identifying, analyzing, and mitigating potential risks on highways, bridges, tunnels, intersections & crossings. Committed to using innovative technology to improve safety for all road users at ABC Transportation. Achieved an average 10% reduction in accidents due to proactive strategies implemented while working as a Traffic Control Technician at XYZ Corp.

Experience

Traffic Control Technician, Employer A
Columbus, Jan 2018 – Present

Investigated and rectified over 300 traffic signal malfunctions in the last 6 months, significantly reducing incident response time and increasing overall driver safety.
Monitored road conditions during peak hours of travel to ensure safe passage for public transit vehicles; implemented corrective measures which lowered accident rates by 10%.
Effectively operated specialized equipment such as signal monitoring systems and portable cameras to direct vehicular movement throughout congested areas, resulting in a 20% decrease in delays due to heavy traffic volume.
Assessed potential hazards posed by construction sites, pedestrians or other obstacles within vicinity of roads and took necessary precautionary steps when needed; minimized risk factors associated with these situations by 25%.
Optimized existing traffic control plans and updated them accordingly based on changing regulations or weather conditions; improved efficiency of routing protocols so that average wait times were reduced from 3 minutes to 1 minute per vehicle on average.

Traffic Control Technician, Employer B
Fresno, Mar 2012 – Dec 2017

Mentored four new traffic control technicians in all aspects of the job, increasing their productivity by 40% within two months.
Reorganized existing traffic control systems for multiple construction sites and road projects to improve safety standards and reduce potential hazards; decreased accident rates by 20%.
Participated actively in a variety of field tests with local officials to develop more efficient traffic flow methods that reduced commute times up to 25 minutes per day on average.
Proficiently operated equipment such as speed guns, radar detectors, light bars & warning signs during normal operations and emergency situations alike; successfully managed over 150 vehicles under challenging conditions without incident or injury across 6+ sites each workday.
Improved overall cost efficiency while controlling traffic at busy intersections through careful analysis of daily data logs which helped identify areas where resources could be better utilized; saved an estimated $1,500 annually in operational costs due to this initiative alone.

Skills

Roadway Design
Traffic Signal Installation
Traffic Signal Maintenance
Traffic Signal Timing
Traffic Signal Troubleshooting
Traffic Control Device Installation
Traffic Control Device Maintenance
Traffic Control Device Troubleshooting
Roadway Safety Audits

Education

Certificate in Traffic Control Technician Training
Educational Institution XYZ
Nov 2011

Certifications

Certified Traffic Control Technician
International Municipal Signal Association (IMSA)
May 2017

1. Summary / Objective

Your resume summary should be a brief but powerful statement that highlights your experience and qualifications as a traffic control technician. Include information such as the number of years you have worked in this field, any certifications or licenses you possess, and how many projects you have completed successfully. You could also mention the safety protocols you are familiar with and how well-versed you are in using various types of equipment for traffic control purposes.

Below are some resume summary examples:

Reliable and highly skilled traffic control technician with 7+ years of experience in the field. Adept at installing, inspecting and maintaining illuminated street signs as well as traffic signals to ensure compliance with safety regulations. At ABC Corporation, designed a system that reduced roadway incidents by 32% while improving customer satisfaction ratings by 20%. Seeking to join XYZ Inc. to utilize expertise in building efficient roadways for its clientele.

Driven traffic control technician with 5+ years of experience in installing, inspecting and maintaining traffic signals. Experienced working on construction sites to ensure safety for pedestrians, drivers and workers. Focused on meeting deadlines while ensuring a safe environment by implementing the most efficient methods available. Recognized as an outstanding team player who can work independently or collaboratively to complete projects quickly and accurately.

Determined Traffic Control Technician with 5+ years of experience in the field. At XYZ, managed traffic control for construction projects on highways and major roadways. Gained expertise in operating signal systems, setting up signs and cones, assisting law enforcement personnel at crash sites, maintaining records such as timesheets and inspection reports related to safety equipment. Committed to providing safe driving conditions for all motorists.

Seasoned traffic control technician with 8+ years of experience constructing, maintaining and repairing traffic signals. Committed to ensuring the safety of all motorists in high-traffic areas. Looking to join ABC’s team and help create an efficient infrastructure that optimizes flow and reduces congestion on roads, highways, bridges and tunnels. Achieved 100% compliance rate for signal maintenance during tenure at XYZ Corporation.

Hard-working traffic control technician with 5+ years of experience in road construction and maintenance. Skilled at managing traffic using advanced tools and equipment, ensuring safe passage for motorists. Recognized for an outstanding safety record by the state highway department after helping to reduce accidents by 40%. At XYZ, worked on several high-profile projects including building a new highway bridge over a major river.

Amicable, detail-oriented traffic control technician with 5+ years of experience in installing and maintaining traffic signals, crosswalks, street signs, guardrails, barriers and other safety equipment. At XYZ Corporation I successfully managed 30 projects simultaneously while ensuring that all safety protocols are met. Recognized for my ability to quickly build relationships with city officials and local contractors.

Dependable Traffic Control Technician with 5+ years of experience in traffic safety and control. Successful history of creating safe, efficient workspaces for construction workers through the installation, repair, and maintenance of signage and barricades. Seeking to leverage expertise at ABC Corporation to ensure that all roadways are properly managed during renovations or new projects.

Skilled traffic control technician with 5+ years of experience installing, maintaining and repairing traffic signals. Experienced in both urban and rural settings for a variety of state departments and municipalities. Seeking to join ABC Corporation as a Traffic Control Technician where I can use my expertise to help ensure the safety of public roads.

2. Experience / Employment

Next comes the work history section, which should be written in reverse chronological order, meaning your most recent job is listed first.

Stick to bullet points when writing this section; it makes the information easier to digest for the reader. You want to include details about what you did and any results or accomplishments that were achieved during your time at each role.

For example, instead of saying “Managed traffic flow,” you could say, “Successfully managed traffic flow on a busy highway by coordinating with other technicians via radio communication and utilizing appropriate signage.”

To write effective bullet points, begin with a strong verb or adverb. Industry specific verbs to use are:

Monitored
Directed
Coordinated
Regulated
Supervised
Inspected
Assessed
Investigated
Operated
Implemented
Enforced
Trained
Adjusted
Reported
Resolved

Other general verbs you can use are:

Achieved
Advised
Compiled
Demonstrated
Developed
Expedited
Facilitated
Formulated
Improved
Introduced
Mentored
Optimized
Participated
Prepared
Presented
Reduced
Reorganized
Represented
Revised
Spearheaded
Streamlined
Structured
Utilized

Below are some example bullet points:

Structured and implemented traffic control plans for over 150 construction sites, ensuring safety compliance and reducing hazards by 25%.
Reliably monitored road conditions in high-traffic areas to identify any potential risks or hazardous situations; identified and addressed issues before they developed into larger problems.
Streamlined the development of documentation such as work schedules, lane closure permits and other related documents needed for efficient day-to-day operations on construction sites.
Formulated effective strategies to manage traffic flow during peak hours at various intersections throughout the city; reduced congestion time by 15 minutes per intersection on average each day.
Implemented advanced engineering techniques when creating traffic control designs that improved efficiency while remaining cost effective; saved $7000+ in budget costs annually compared to traditional methods used previously.

Reported to worksites daily to install, maintain and remove traffic control devices such as barriers, cones and signs; reduced installation time on average by 25%.
Meticulously inspected roadways for hazardous conditions prior to setting up a work zone; identified over 200 roadway defects in the past 6 months alone.
Trained 10+ new technicians in proper best practices of using personal protective equipment (PPE) when installing/removing traffic control items, ensuring that all safety protocols were followed correctly at all times.
Demonstrated outstanding problem-solving skills when coordinating with local authorities regarding various lane closures or construction projects; enabled efficient completion of 20+ jobs within budgeted timelines this year so far.
Compiled detailed reports summarizing activities conducted each day to ensure compliance with state regulations pertaining to traffic safety laws & standards; successfully passed 4 external audits this quarter without any non-compliance issues reported.

Spearheaded the installation, maintenance and repair of traffic lights, signs and road markings for over 6 miles of highway; reduced the total number of accidents by 15%.
Resourcefully designed a new system to augment existing safety protocols that enabled better coordination between vehicles on highways; improved travel times by 20 minutes per trip.
Prepared detailed reports summarizing all daily activities with respect to equipment installations, repairs or replacements in order to ensure compliance with state regulations.
Facilitated quick response time in emergency situations such as road closures due to inclement weather conditions or construction work; averted serious accidents at least twice a month through timely intervention.
Adjusted various settings on computerized systems connected with traffic control signals based on changing environmental factors like rush hour traffic patterns and daylight hours saving up to 8 man-hours every week.

Independently introduced and implemented new traffic control systems that improved efficiency by 25%, leading to an annual cost savings of $10,000.
Revised existing safety protocols and procedures for road construction projects, ensuring the safe passage of pedestrians and vehicles in high-traffic areas.
Reduced average wait times at intersections during peak hours by 15 minutes through strategic placement of cones, flags and illuminated warning signs along routes.
Directed a team of 10 workers responsible for setting up barriers & signage around construction sites; oversaw all tasks related to maintenance & repair work on equipment used in traffic control operations.
Monitored vehicle speed limits throughout entire jurisdiction using advanced radar technology, resulting in a 20% decrease in overall incidents involving reckless driving over 6 months period.

Presented traffic plans and safety regulations to personnel on-site, ensuring that all workers understood the risks involved and complied with traffic control guidelines; achieved a 95% compliance rate within 3 months of employment.
Diligently monitored construction sites for 12+ hours daily for up to 6 days per week, working in shifts to reduce congestion during peak hours; reduced average travel time by 15 minutes during rush hour periods.
Enforced safe driving rules and speed limits through verbal warnings or written citations when necessary; decreased local accident rates by 22%.
Achieved full certification from National Safety Council as Traffic Control Technician after passing the final exam with an 85% score in 2015.
Advised pedestrians, cyclists & other road users regarding various safety measures while traversing busy intersections or highways such as wearing reflective clothing at night & always following traffic signals correctly.

Regulated traffic flow at busy intersections, ensuring the safe passage of over 8,000 vehicles per day and minimizing delays to local traffic.
Utilized specialized equipment such as electronic signs and cones to redirect vehicle movement during construction or maintenance activities; reduced average commuter wait time by 15%.
Developed comprehensive plans for lane closures & detours in order to minimize congestion during peak rush hour periods; saved an estimated $1 million in fuel expenditure last year alone.
Inspected roadway infrastructure on a regular basis for damage caused due to weather conditions or other environmental factors; reported any issues promptly leading to faster repairs with minimal disruption times of up to 50%.
Substantially increased awareness among commuters about road safety regulations through proactive outreach campaigns, resulting in a 40% reduction in accidents within city limits annually.

Supervised the installation of over 500 traffic control devices and signals along major highways, ensuring safe travel for commuters by implementing proper speed limits and cautionary measures.
Operated advanced computerized systems to monitor real-time traffic data on a daily basis with 98% accuracy, detecting any potential hazards before they became an issue.
Coordinated the work of local municipal authorities in handling construction or maintenance projects that impacted road conditions; minimized disruption time by 40%.
Expedited the flow of vehicular movement during rush hour periods through efficient placement and adjustment of barriers, cones & other signage according to changing weather conditions; reduced average commute times by 20%.
Thoroughly inspected all equipment prior to use on each shift to ensure maximum safety for travelers at all times; decreased accident rates within assigned areas by 10%.

3. Skills

Skill requirements will differ from one employer to the next; this can easily be ascertained from the job posting. Organization A may require the candidate to have experience with traffic control software while Organization B may require knowledge of highway construction.

It is essential to keep this in mind because many employers use applicant tracking systems, which are computer programs that scan resumes for certain keywords before passing them on to a human. Therefore, you want to tailor the skills section of your resume according to each job posting and include relevant words or phrases from it.

In addition, besides just listing skills in this section, you should also discuss them more deeply in other areas such as the summary statement or work history sections. This will help demonstrate how well-versed you are in those particular topics and make sure that your resume stands out from others competing for the same position.

Below is a list of common skills & terms:

Roadway Design
Roadway Safety Audits
Traffic Control Device Installation
Traffic Control Device Maintenance
Traffic Control Device Troubleshooting
Traffic Data Collection and Analysis
Traffic Signal Installation
Traffic Signal Maintenance
Traffic Signal Timing
Traffic Signal Troubleshooting

4. Education

Mentioning an education section on your resume will depend on how far along you are in your career. If you just graduated and have no prior experience, include an education section below your objective. However, if you have years of experience as a traffic control technician or other related roles, omitting the education section is perfectly acceptable.

If including an education section, try to mention courses and subjects that are relevant to the job role such as engineering principles and traffic control regulations.

Certificate in Traffic Control Technician Training
Educational Institution XYZ
Nov 2011

5. Certifications

Certifications are a great way to demonstrate your expertise in a particular field. They are also proof that you have taken the time and effort to stay up-to-date with industry trends and knowledge.

When applying for jobs, make sure to include any certifications that may be relevant or required by the employer. This will show them that you are well qualified for the position and can hit the ground running when it comes to performing job duties.

Certified Traffic Control Technician
International Municipal Signal Association (IMSA)
May 2017

6. Contact Info

Your name should be the first thing a reader sees when viewing your resume, so ensure its positioning is prominent. Your phone number should be written in the most commonly used format in your country/city/state, and your email address should be professional.

You can also choose to include a link to your LinkedIn profile, personal website, or other online platforms relevant to your industry.

Finally, name your resume file appropriately to help hiring managers; for Kolby Dicki, this would be Kolby-Dicki-resume.pdf or Kolby-Dicki-resume.docx.

7. Cover Letter

Writing a cover letter is an important step in the job application process. It is a great way to highlight your skills, qualifications and experience that are relevant to the role you’re applying for.

Cover letters should be around 2-4 paragraphs long and include information about why you think you would be a great fit for the position. They provide recruiters with valuable insights into who you are as a professional and make it easier for them to assess if your profile matches their requirements or not.

Below is an example cover letter:

Dear Brayan,

I am writing to apply for the traffic control technician position at your company. With more than 5 years of experience in the field, I am confident I have the skills and qualifications needed to be a successful asset to your team.

In my current role as a traffic control technician for ABC Corporation, I am responsible for setting up and maintaining traffic control devices such as stop signs, barricades, and cones. I also regularly inspect equipment to ensure it is in good working condition and respond to customer inquiries or complaints. In addition, I have experience training new employees on proper traffic control procedures.

Through my work experience, I have developed strong attention to detail and problem-solving skills that I believe would benefit your company. My ability to stay calm under pressure has also been invaluable in managing high-stress situations. In addition, my excellent communication skills allow me to effectively communicate with co-workers, customers, and other stakeholders.

I am confident that I can be a valuable asset to your team and contribute to the success of your organization. Please find attached a copy of my resume for your review; if you have any questions or would like additional information about my qualifications, please do not hesitate to contact me at [phone number] or [email address]. Thank you for your time and consideration; I look forward hearing from you soon!

Sincerely,

Kolby